Oki ML1120, Technical Reference Manual

Page: 109 / 254

Technical Reference Guide – Command descriptions > 109
FF will be performed to the next top of form position even
when the FF is received at the top of form position.
Double width set by SO (or ESC SO in Epson mode) will be
reset.
> Related functions:
TOF will be set on power-up or l-Prime (or ESC 4 in IBM
mode).
Receiving ESC } NULL signal.
Receiving ESC { n signal.
Executing Menu setting.
V
ERTICAL TAB
> Code: VT
> Compatibility:
ML1190 eco: EPSON LQ/IBM
ML1120 eco: EPS FX/IBM III
> Function:
Upon receipt of this command the printer will print out
what is in the buffer then move the paper to the next
preprogrammed tab stop.
> Additional details:
If vertical tabs are not set this command will function the
same as: CR in Epson mode, LF in IBM mode.
Executing more than the number of vertical tabs set will
cause execution of the first vertical tab of the channel on
the next page.
> Related functions:
Double width set by SO (or ESC SO in Epson mode) will be
reset.
S
ET VERTICAL TAB STOPS
> Code: ESC B n1 n2 ... nk NUL