Microline 1120 User’s Guide
41
Printhead Gap
Adjusting the Head Gap
The head gap is the distance between the printhead and the platen roller.
When you use envelopes or multipart forms, you need to have a larger gap
than when using plain paper. Use the recommended head gap to ensure the
best print quality and easy paper feed.
To adjust the head gap, remove the access cover. Then move the lever on
the right side of the ribbon cartridge to the correct position for the type of
media being used as detailed in the following tables.
Lever Positions: by Paper Thickness
* print quality not guaranteed
Lever Positions: by Paper Type
CAUTION!
Incorrect setting of the head gap can cause printhead damage
or ribbon jams. To avoid these problems set the head gap for
the type of media being used.
Paper Thickness
Lever Position
0.06 - 0.10 mm
1
0.11 - 0.18 mm
2
0.19 - 0.25 mm
3
0.26 - 0.32 mm
4
0.33 - 0.39 mm
5 *
0.40 - 0.46 mm
6 *
Paper Type
Lever Position
Single sheets, 14-22 lb (52-81 g/m2)
1
Single sheets, 22-34 lb (81-128 g/m2)
2
Envelopes
4
Forms, 2-part
2
Forms, 3-part
2
Forms, 4-part
3
Forms, 5-part
4
Summary of Contents for ML1120
Page 1: ...59389401_cvr jpg...
Page 6: ...Microline 1120 User s Guide 6 Back View F1_24_back jpg 1 Tractors 2 Power Cord Connector 1 2...
Page 34: ...Microline 1120 User s Guide 34 1120_bottomfeed_7a jpg 1120_bottomfeed_21 jpg 2 2 1 1...
Page 43: ...Microline 1120 User s Guide 43 Part Numbers Ribbon Black 43571801...