manualshive.com logo in svg

Oki Microline 4410, User Manual, Page: 35 / 139

Share
Download
Oki Microline 4410 User Manual Download Page 35

35

Error Message

What to Do

DATA REMAIN

Data is being held in the buffer due to the fact that the printhead
cover is open. Close the cover, then press ON-LINE/RESET.

EEPROM

Try turning the printer off, then on again. If message persists,
contact your service provider (see Section 4).

EJECT JAM

Paper jammed as it was being ejected. Correct the jam and
reload paper.

FEED JAM

Paper jammed during a print job as it was feeding through the
printer. Clear the paper jam (see Section 2) and reload paper.

FUSE

Internal fuse has blown. Contact your service provider (see
Section 4).

HEAD 1 FAN

Printhead Fan 1 is damaged. Contact your service provider (see
Section 4).

HEAD 2 FAN

Printhead Fan 2 is damaged. Contact your service provider (see
Section 4).

HEAD THERMAL

Printhead has overheated. Turn the printer off and wait for the
printhead to cool down, then try again. If the message persists,
contact your service provider (see Section 4).

HEAD THERMISTOR

Printhead thermistor is damaged. Contact your service provider
(see Section 4).

HOMING

Try turning the printer off, then on again. If message persists,
contact your service provider (see Section 4).

INVALID IPT

Illegal IPT alarm. Try turning the printer off, then on again. If
message persists, contact your service provider (see Section 4).

LCD TIME OUT

Try turning the printer off, then on again. If message persists,
contact your service provider (see Section 4).

LF THERMAL

The line feed motor has overheated. Turn the printer off and wait
for it to cool down, then try again. If the message persists,
contact your service provider (see Section 4)

LOAD JAM

Paper jammed as it was being loaded into the print path. Press
PARK to remove the paper from the print path, then clear the
paper jam (see Section 2) and reload paper.

MAIN LSI

Try turning the printer off, then on again. If message persists,
contact your service provider (see Section 4).

OFF-LINE

Printer is off line (ALARM light on). Press ON-LINE/RESET
when you are ready to place the printer back on line.

Summary of Contents for Microline 4410












































































































































Reviews:

No comments