manualshive.com logo in svg

Oki Microline 4410, User Manual, Page: 2 / 139

Share
Download
Oki Microline 4410 User Manual Download Page 2

2

Every effort has been made to ensure that the information in this document is complete,
accurate, and up-to-date. Okidata assumes no responsibility for the results of errors
beyond its control. Okidata also cannot guarantee that changes in software and equipment
made by other manufacturers and referred to in this guide will not affect the applicability
of the information in it. Mention of software products manufactured by other companies
does not necessarily constitute endorsement by Okidata.

© 2000 by Okidata. All rights reserved.

Second edition January, 2000.

Written and produced by the Okidata Training & Publications Department. Please address
any comments by mail to:

Training & Publications Department
Okidata, Division of Oki America, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, NJ 08054-4620

or by email to

[email protected]

For the latest product information and manuals, we welcome you to visit our web site:

http://www.okidata.com

Year 2000 Compliance

All products currently sold by Okidata are Year 2000 Compliant. Each product contains
information technology that accurately processes date and time data between the years
1999 and 2000. These products, when used in combination with products purchased from
other manufacturers, whose products properly exchange date and time information, will
accurately process the date and time. All future products are committed to meeting the
same Year 2000 compliance.

E

NERGY

 S

TAR

®

As an E

NERGY

 S

TAR

 Partner, Oki Data has determined that this

product meets the E

NERGY

 S

TAR

 guidelines for energy efficiency.

OKI and OKIDATA  are registered trademarks/marques déposées/marcas registradas Oki Electric Industry
Company, Ltd.

ENERGY STAR is a trademark of the United States Environmental Protection Agency. Epson is a
registered trademark of Epson America, Inc. Ethernet is a trademark of Digital Equipment Corporation.
IBM is a registered trademark of International Business Machines Corp. Microsoft and Windows are
registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries.

Summary of Contents for Microline 4410












































































































































Reviews:

No comments