Oki MC780f, User Manual

Page: 203 / 380

8 [Administration] Tab Page
202 [Setup] Item List
„
Printer settings
You can configure how the printer works and the printer options needed for the raw print jobs.
The [Printer] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
P.22 “Access Policy Mode”
P.136 “[Setup] Item List”
P.202 “Setting up General Setting”
P.203 “Setting up Default Raw Job Setting”
P.204 “Setting up Raw Job Setting”
‰ Setting up General Setting
In General Setting, you can specify the printer related options.
Item name Description
1 Period of time to save
Private,Hold,Proof and invalid Jobs Select how long the private, hold, and test print jobs are kept. You can select in the range
from 1 to 12 hours, or from 1 to 30 days. Select [Indefinite] to retain all jobs in the queues
until a user manually deletes them. [14 Days] is set as the default.
2 LT<-->A4 Select whether to print a document intended for one paper size can be printed on paper of a
different size. For example, you can print a document set up for Letter size on A4 paper.
When disabled, this equipment will prompt users for the correct paper size. [Enable] is set
as the default.
3 Wide A4 Mode (for PCL) Select whether the width of the printable area of copy paper is widened or not when you are
printing a PCL print job on A4 paper. Select [Enable] to widen it for approx. 3.5 mm / 0.14
inch (when in a portrait direction) and approx. 1.5 mm / 0.06 inch (when in a landscape
direction). Thus more data can be printed for each line. [Disable] is set as the default.
4 Restriction for Print Job Select whether or not to restrict printing certain print jobs.
y None — Select this to print all data.
y Only Private — Select this to print private print jobs only.
y Only Hold — Select this to print hold print jobs only.
y Only Private/Hold — Select this to print private and hold print jobs only.
1
2
3
4