39
Control Panel and Configuration Menu
Configuration Menu Overview
To display the settings menu for this machine, select UTILITY in the main screen,
and then press the Enter
key. From the UTILITY menu, settings for the various
machine functions can be changed.
"
Machine configuration settings can also be viewed over your network
using a web browser. Simply enter the machine’s IP address into your
browser. If you wish to make configuration changes you will need to login
to administrator mode using the administrator’s password (default is
sysAdmin
).
UTILITY Menu
From this menu, various machine settings can be changed. The UTILITY menu
is structured as shown below.
"
To return to the previous screen in the UTILITY menu, press the Back
key. (If the Back key is pressed while settings are being specified, those
settings are not saved.)
"
The ADMIN. MANAGEMENT menu is accessible only by the administra-
tor. To display the settings for this menu, select ADMIN. MANAGEMENT,
use the keypad to type in the 6-digit administrator access code (default:
000000
), and then press the Enter
key.
UTILITY
MACHINE SETTING
TRAY1 PAPER
SETUP
ADMIN. MANAGE-
MENT
COPY SETTING
DIAL REGISTER
FAX TX OPERATION
Summary of Contents for MC160N
