Oki MB472dn User Manual Download Page 554

Page: 554 / 1137

Other Problems

Memo

If you cannot solve a problem with the following solutions, contact your dealer.

Symptom

Cause

Solution

Reference

Nothing is displayed

on the display screen

after turning the

machine on.

The power cord is unplugged.

Turn the machine off, and then plug in the

power cord firmly.

The power is out.

Check whether the power is supplied to

the outlet.

The machine does not

operate.

The power cord is not firmly plugged in.

Plug in the power cord firmly.

The machine is turned off.

Turn the machine on.

Turning the

Machine On

The power switch LED

lamp quickly flashes

at approximately 0.3-

second intervals.

The machine may be malfunctioning.

Unplug the power cord immediately, and

then contact your dealer.

The machine does not

start printing.

An error is displayed.

Check the error code, and then follow the

on-screen instructions.

Error Message

A LAN cable or USB cable is unplugged.

Plug in a LAN cable or USB cable firmly.

There may be a problem with a LAN cable

or USB cable.

Use another LAN cable or USB cable.

A LAN cable or USB cable does not meet the

standard.

Use a USB 2.0 cable.
Use an Ethernet 10BASE-T/ 100BASE-

TX cable.

There may be a problem with the print

function.

Press

(SETTING), and then select

[Reports] > [Configuration], and print out

the configuration list to check the printing

performance.

Reports

A communication protocol is disabled.

Press

(SETTING), and then select

[Admin Setup] > [Network Menu] >

[Network Setup] and enable the

communication protocol that you are

using.

A printer driver is not selected.

Set the printer driver of the machine as

the default printer.

The output port of the printer driver is

incorrect.

Specify the output port for connecting a

LAN cable or USB cable.

Nothing is displayed

on the display screen.

The machine is in Sleep mode or Deep Sleep

mode.

Check (POWER SAVE) flashes, and then
start the machine by pressing (POWER
SAVE).

Using the

Operator Panel

Print data is not sent. A LAN cable or USB cable is damaged.

Connect a new cable.

The time-out period set on the computer

has elapsed.

Set a longer time-out period.

There is an abnormal

sound.

The machine is inclined.

Place the machine on a flat surface.

There are waste paper or foreign objects

inside the machine.

Check inside the machine, and then

remove any objects.

The top cover is opened.

Close the top cover.

There is a buzzing

The machine is printing on heavy or light

This is not a malfunction. You can proceed -

553

Summary of Contents for MB472dn


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MB472dn

Reviews:

Related manuals for MB472dn

Brands by name

Popular brands

Oki MB472dn, User Manual

Search results

Summary of Contents for MB472dn

Reviews:

Related manuals for MB472dn

Brands by name

Popular brands