Oki MB460 User Manual Download Page 14

Page: 14 / 179

14 • Overview

Enter Key

When in Switching mode:
• Used to confirm the Mode selected.
• Used to start Push Scan (If Push scan is selected, the Executing Push scan

screen is displayed.)

When Setting up:
• Increases/decreases the value of the tree structure.
When entering Pin ID:
• Used to confirm the PIN ID entered.
When in Error/Warning State
• Used to recover.

One Touch Key Panel (MB470 MFP & MB480 MFP only)

The One Touch keys (7a) are used to dial numbers from #00 to #09 that you

have programmed in as fax numbers.
The shift key (7b) switches between numbers from 00 to 04 and numbers from

05 to 09.

Start Button:

• Press to execute the function selected (Copy, Scan, etc.).
• Press to recover from Error/Warning states.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for MB460




















































































































































































Search results

Summary of Contents for MB460

Reviews:

Oki MB460, User Manual, Page: 14 / 179

Search results

Summary of Contents for MB460

Reviews: