MB280
- 17 -
2 - Installation
3
Adjust the paper guides against the right and left
edges of the sheet or the envelope.
4
Print making sure that the chosen paper format
corresponds to the selected format on the printer
(refer to
Copy
, page 18).
Use of envelopes
•
Feeding can be done only through the manual feed.
•
Recommended area should be the area which
excludes 15 mm from the leading edge, 10 mm from
both the left and right edges, and the rear edge.
•
A few lines may be given in solid print at the part of
being overlapped.
•
Envelopes which are not recommended may lead to
improper printing (refer to the paragraph
Specifications
, page 75).
•
Curled envelope after printing should be fixed
manually.
•
Small crumples on the edge of the wide side of
envelopes, smearing, or less clear printing may
appear on the reverse side.
•
Set envelope by pressing the folding line of four edges
properly after releasing air inside.
•
Set envelope in a proper position after aligning in case
it is bent or warped.
•
Paper conditioning is not allowed. And it should be
used under normal office environment.
