Microsoft windows > 34
Using TCP/IP protocol
When using lpr in UNIX and other TCP/IP environments, please select Yes. To use in
a TCP/IP environment, an IP address should be assigned to the Ethernet card.
If Yes has been selected and TCP/IP is the only working protocol and the IP address
has not already been assigned, you can either obtain an IP address automatically or
assign an IP address.
When Obtain an IP address automatically is selected, the device IP address will
be automatically assigned by the DHCP server. In an environment without a DHCP
server, please assign the IP address manually.
If you are manually assigning an IP address, you need to enter:
>
An IP address
>
Subnet mask
>
Gateway address
10. Click Next.
Using Bonjour protocol
Bonjour is the preferred protocol for printing data from the Macintosh environment.
Using NetBEUI protocol
Using NetBEUI makes it easy to manage your Oki product and print within the
network environment of Windows.
11. When the settings are correct, click Execute. The new settings are transmitted to
the network card but it still operates with pre-transmission settings.
12. Click Finish to validate the new settings.
13. Switch the printer off for 15 seconds and on again.
Now that both Windows and the printer have been configured to use TCP/IP, the next step
is to configure Windows to print to the network printer.
N
ET
BEUI
PROTOCOL
N
ETWORK
PRINTER
SETTINGS
There are two configurable items under NetBEUI within the printer. These can be
configured using the standard set-up utility described in
Although there are some differences in configuration options between the various Windows
platforms, the procedure for printing using NetBEUI is the same.
Please ensure the NetBEUI protocol has been installed in Windows. This can be confirmed
by checking the network settings. If NetBEUI has not been installed please refer to the
section below.
The relevant Windows installation CD-ROM may be required and you should follow the on-
screen dialogue box prompts.
COMPUTER NAME
NAME ASSIGNED TO THE PRINTER
Workgroup
PrintServer
a
a. Although the workgroup name can be changed, it is recommended
that it remains as PrintServer.
Comment
User definable description