OKI
®
ES3640e MFP
Safety, Warranty and Regulatory Information
Safety Information
Your product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should
take to avoid hurting yourself or damaging the product.
• Carefully read the provided setup and operating
instructions.
• Save all provided documentation for future reference.
• Read and follow all warning and instruction labels on
the product itself.
• Unplug the product before you clean it. Use only a
damp cloth. Do not use liquid or aerosol cleaners.
• Place your product on a firm, solid surface. If you put it
on something unsteady, it may fall and be damaged. If
you place it on a soft surface, such as a rug, sofa, or
cushion, the vents may be blocked, causing the
product to overheat.
• Protect your product from overheating. Make sure no
obstructions block the openings of the product. Do not
put the product on or near a heat source (such as a
radiator or heat register). Keep the product out of
direct sunlight. Allow enough room around the product
for adequate ventilation and easy access to the paper
trays. If you put the product in any kind of enclosure,
make sure the enclosure is properly ventilated.
• Do not use your product near water. Do not spill liquid
of any kind into it.
• Be sure to use the 15A AC power cord supplied with
the product. Use of a power cord not supplied with this
product, or an extension cord, may result in
overheating. Do not use the power cord supplied with
the product with any other electrical device or for any
other purpose.
• Do not connect this product to an uninterruptible
power supply (UPS). For further information please
contact Oki Data at 1-800-OKI-DATA.
• Be certain that your power source matches the rating
listed on the back of the product. If you are not sure,
check with your dealer or with your local power
company.
• Your product has a grounded, three-prong plug as a
safety feature. This plug only fits into a grounded
outlet. If the plug does not fit, the outlet may be an
older, non-grounded type. Contact an electrician to
have the outlet replaced. Do not use an adapter to
defeat the grounding.
• Install the product near an easily accessed power
outlet.
• Avoid damaging the power cord. Do not put anything
on it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with
the product, make sure that the total of the amperes
required by all the equipment on the extension is less
than the extension’s rating. The total ratings of all
equipment plugged into the outlet should not exceed
15 amperes.
• Do not poke anything into the ventilation slots of the
product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.
• Aside from the routine maintenance described in the
documentation, do not try to service the product
yourself. Removing the cover may expose you to
shocks or other hazards.
• Do not make any adjustments other than those
outlined in the documentation. You may cause damage
that will require extensive repair work. The provided
documentation explains how to get your product
serviced by qualified Oki Data technicians.
If anything happens that indicates that your product is
not working properly or has been damaged, unplug it
immediately and follow the procedures in the provided
documentation for having your product serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the product, or the product
has been exposed to water.
• The product has been dropped, or the product is
damaged.
• The product does not function normally when you are
following the operating instructions.
© 2005 Oki Data Americas, Inc.
59376201
