2 English
7. Holding the new image drum by the blue
handles, lower it into the machine, aligning the
pegs at each end with the slots in the sides of
the printer cavity.
Important!
Do not re-install your old toner cartridges at
this time.
8. Close the top cover and press down firmly so
that the cover latches closed.
Note
The machine automatically starts the priming
process which takes about 4 minutes. The
LCD screen illuminates and the Attention LED
flashes. Ignore any on-screen messages.
When the priming process is complete, the
light on the LCD screen goes out and the motor
stops turning. If the Attention LED continues
to flash, ignore it.
9. Open the machine’s top cover fully.
10. Slide the locking collars to the right (1) and
remove the priming cartridges (2). Place them
in the disposal bags (3) supplied and discard in
accordance with local regulations.
11. Remove the original toner cartridges from the
old image drum (a, b) and install them in the
new image drum (c, d, e).
12. Place the old drum in the shipping packaging
and discard in accordance with local
regulations.
13. Close the machine.
The machine automatically initializes.
b
a
b
c
a
d
e
c
a
b
