Oki CX 1145 MFP Fax Manual Download Page 130

Page: 130 / 177

129

3. Lists/Reports Samples

Transmission journal (Manually and automatically output)

This is the list of the transmission-related information such as communication results and remote Fax
numbers.
•

Output information for the last 40 or 120 communications can be confirmed. Switching the number of
communications output. (

P.121 “Setting the (transmission/reception) journal output and its number”)

•

The mark in the “TO” column is appended when the 2nd TEL NUMBER is used for transmission.
The mark in the “MODE” column is appended when the 2nd line is used.

•

If any errors occur during transmission, the error code is displayed under the “STATUS” column. (

P.118 “Error code table”)

Summary of Contents for CX 1145 MFP


















































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Fax Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands