Home
/
Oki
/
C9600dn
/
Configuration Manual

Oki C9600dn, Configuration Manual, Page: 185 / 259

Share

Page: 185 / 259

Oki C9600dn Configuration Manual Download Page 185

Printing from UNIX: Configuring the Operating System • 185

5. Create the spool directory and error log file.

Example

For spool Directory PRINTER_lp and Error Log file
PRINTER_lp_errs

# mkdir /usr/spool/PRINTER_lp

#touch/usr/spool/PRINTER_lp/

PRINTER

_lp_errs

# chown –R daemon /usr/spool/PRINTER_lp

# chgrp –R # daemon /usr/spool/PRINTER_lp

6. Check that lpd (printer daemon) is activated.

# ps aux | grep lpd

7. If lpd is not running, start it by logging in as superuser and

executing

# /usr/lib/lpd &

Sun Solaris 2.x Configuration

The procedure below must be used for registering a remote printer.

NOTE

Admintool is normally used to register remote printers
on Open Windows. However, it cannot be used here,
because the data recipient and queue have the same
name.

NOTE

If Solaris 2.x is connected to the remote printer for a
long period according to the system specifications,
errors and forced disconnection may occur.
Therefore, if paper tearing, off-line and other errors
result in waiting time, printing may have to be aborted.

«
...
183
184
185
186
187
...
»

Summary of Contents for C9600dn




































































































































































































































































Reviews:

No comments