C8800 User’s Guide
111
Network Menu
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
Notes:
Factory default settings are shown in
bold
.
Settings with a dagger (†) only appear when the
appropriate option is installed.
Item
Settings
Explanation
TCP/IP
ENABLE
/
DISABLE
Enables or disables this network
protocol.
IP VERSION
IP V4
/ IPV 4 &
V6
NETBEUI
ENABLE
/
DISABLE
Enables or disables this network
protocol.
NETWARE
ENABLE
/
DISABLE
Enables or disables this network
protocol.
ETHERTALK
ENABLE
/
DISABLE
Enables or disables this network
protocol.
FRAME TYPE
AUTO
/ 802.2 /
802.3 /
ETHERNET II /
SNAP
Selects the Ethernet MAC layer frame
type.
IP ADDRESS
SET
AUTO
/
MANUAL
Specifies whether IP address allocation
is automatic (DHCP) or manually
assigned.
IP ADDRESS
xxx.xxx.xxx.xxx
Current assigned IP address. To
change, press
ENTER
and use
+
/
–
keys to increment 1st octet, then press
ENTER
again to move on to next octet.
When 4th octet has been set, press
ENTER
again to register new address.
SUBNET MASK
xxx.xxx.xxx.xxx
Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx
Current assigned gateway address. To
change, proceed as above.
FACTORY
DEFAULTS
EXECUTE
Reloads the settings present when the
unit was setup by the manufacturer.
WEB
ENABLE
/
DISABLE
Enables or disables Web config. facility.
