- 146 -
6. Utility Software
You can register and edit printer profile to the machine. This section describes how to register
ICC profile.
1
Click [Start], and then select [Okidata] > [Configuration Tool].
2
Select [Storage Manager] from the [Plug-ins] menu.
3
Click
(New Project).
4
Click
(Add File to Project) and select [Color matching file (.ICC, .ICM)] from
the file extension list.
5
Select a profile you want to register and then click [Open].
6
Select the type of the profile you want to register from [FILE TYPE].
7
Click [Component] of the registered profile, and [Storage Manager] dialog is
displayed.
8
Select a number you want to register.
You cannot select numbers already used in the project, which are displayed on a yellow
background.
9
Enter comments in [Comments] if necessary.
10
Click [OK], to apply the change.
11
Select the machine from the bottom of the Storage Manager Plug-in window.
12
Click
(Send project files to printer).
13
Click [OK].
You can register such as logos to the machine as forms, and then print overlays. This section
describes how to register forms.
About how to Print Overlays
Overlaying Forms or Logos (Overlay)
• When using a Windows PS printer driver, administrator privileges are required.
• If you use the Windows PCL printer driver, see "
".
Creating a Form
1
Open the "Printer folder".
2
Right-click the printer icon, and then select the necessary printer driver from
[Printer Properties].
3
Select the [Ports] tab, select the [FILE] check box from [Port], and then click
[Configure Port].
4
Create a form to register on the machine.
5
Select [Print] from the [File] menu.
6
Start printing.
7
Enter the file name under which you want to save.
example: C: temp form.prn
8
Select the previous port from [Printer Port] on the [Port] tab, and then click
[OK].
Registering the Form to the Machine Using Configuration Tool
1
Click [Start], and then select [Okidata] > [Configuration Tool].
2
Select [Storage Manager] from the [Plug-ins] menu.
Registering ICC Profile
Registering Forms (Form Overlay)
