manualshive.com logo in svg

Oki C7500n, Maintenance Manual

Share
Download
Oki C7500n Maintenance Manual Download Page 72

41955801TH  Rev.8

72 /

Oki  Data  CONFIDENTIAL

3.

ADJUSTMENT

This device is adjusted by key input from the operator panel.

Other than the general menu, this device supports a maintenance menu. Select the menu that
matches your objective.

3.0

System Maintenance MENU

The printer enters this mode when you turn on the power supply switch while holding down the
[Menu]+[Item]+[Value]+[Cancel] (0+1+6+7)switches.

Note:

This  menu is not disclosed to end-users because changes can be made to brand/
destination, etc.

Table 3-0 (1/2)   Maintenance Menu display  Table

Item(1st Line)

OKIUSER

ENGINE SPEED

HIGH RESOLUTION

ENG STATUS PRINT

TEST PRINT MENU

PAGE CNT PRINT

PCL

IBM PPR III XL

EPSON FX

Adobe Postscript

HP-GL/2

PCL XL

PDF

Value(2nd Line)

ODA
OEL
APS
JP1
JPOEM1
OEMA
OEML

HIGH
LOW

ENABLE
DISABLE

EXECUTE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

ENABLE
DISABLE

Functions

Sets Brand
JPOEM1: Japan OEM
OEMA: Overseas OEM for A4 default
OEML: Overseas OEM for Letter default
Boots up automatically when the Menu is existed.

For swithing the engine speed between the 
overseas 16/24PPM model and the 20/24PPM, 
24/26PPM model.
(Valid only for PX711 600dpi Head)
  HIGH: 20/24PPM model (C7300), 24/26PPM 
model (C7350).
  LOW : 16/24PPM model (C7100)
Reboots automatically as the menu is exited.
 note:  This function for PX713 is ignored.

Not used.
 note:  Don’t change the setting value.

Selecting by the Select switch, then
pressing the On-line switch will prompt 
initialization and printing Engine information.

Switches ENABLE and DISABLE to display the 
TEST PRINT MENU category in the User Menu.
( See "ID Check Pattern" section. )

Sets printing or not printing the total page count 
in PRINT MENU MAP.

Cange the default PDL for each brand.

PDLs that are disabled in this Menu will not  be 
displayed on User Menu or Adomin Menu’s 
PERSONALITY.
When print data in the PDL language set to 
DISABLE is received, the printer will display  
INVALID DATA and discard received data.  (HP-
GL/2 is under development, and there is no plan  
to implement as yet in the product. )
The PDF function requires Adobe Postscript; 
thus, switching  ON/OFF of PDF alone  is 
disabled.
(Setting Adobe Postscript  on DISABLE will set 
the PDF function to DISABLE as well. )
On the PX711/713, neither Adobe Postscript  nor 
PDF can be set to DISABLE. (They are to be 
always set to ENABLE for use. Even if they are 
set to DISABLE, the printer processes the data it 
receives. This item is incorporated only in the 
menu ahead of time for future extension. )

DF

*

*

*

*

*

*

*

*

*

*

*

*

Category

OKIUSER

CONFIGURATION 
MENU

ENG STATUS PRINT

TEST PRINT MENU

PAGE CNT PRINT

PERSONALITY

Summary of Contents for C7500n

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands