manualshive.com logo in svg

Oki C7500n, Maintenance Manual

Share
Download
Oki C7500n Maintenance Manual Download Page 129

41955801TH  Rev.8

129 /

Oki  Data  CONFIDENTIAL

3

White page (Fig 5-2  C )

•

Is the LED head assembly connected properly to the connection board (Y73 PWB) or engine board
(K7N/K7V PWB)?

NO

Connect the cables, connect the LED assembly to the connection board (Y73 PWB), and
engine board properly.

▼

•

YES

Is +5V output to the following power connector pins on the connection board (Y73 PWB)?
+3.8V: Pin 1, 2, 3, 4, 5, 6

•

YES Is +5V output to the following cable connector pins between the connection board (Y73

PWB) and LED head assembly?
3 pin for YPOW connector : LED head assembly - yellow
3 pin for MPOW connector : LED head assembly - magenta
3 pin for CPOW connector : LED head assembly - cyan
3 pin for KPOW connector : LED head assembly - black

NO

Replace the connection board (Y73 PWB).

▼

•

YES Check the cable connections, then replace the LED head assembly.

▼

•

NO

Is 34V output to the power connector on the engine board (K7N/K7V PWB)?
+34V: Pin 12, 13, 14

NO

Check the cable connections, then replace the low-voltage power unit.

▼

•

YES

Is 34V output to HVOLT connector pin 2 on the engine board (K7N/K7V PWB)?

NO

Replace the engine board.

▼

•

NO

Check the cable connections, then replace the high-voltage power unit or belt cassette
assembly. Did the printer recover?

YES End.

▼

•

NO

Is the I/D unit terminal connected properly to the contact assembly. (See Fig. 5-2)

NO

Connect the I/D unit terminal properly to the contact assembly.

▼

•

YES

Replace the image drum unit.

Note:

1. Remove EEPROM from the old board and set it on the new board upon replacing the

engine board (K7N PWB).

2. If EEPROM is not replaced, refer to section 3.2.2.
3. When replacing the engine board (K7V PWB), upload EEPROM data from the board and

then download it to a new board, using a life counter tool.

Summary of Contents for C7500n

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands