Oki C530dn User Manual Download Page 73

Page: 73 / 135

– C330/C530

Menu

Functions

FILE SYS

MAINTE2

(cont.)

SD CARD

ERASE

EXECUTE Deletion of all data stored in

the SD Card. Data cannot be

recovered. DoD 5220.22-M

sanitizing formula is used for

clearing the card. The printer

will restart after changing the

setup menu.
The progress of the proce-

dure is displayed as a per-

centage.
The following message

appears after pressing the

button.

ARE YOU SURE?
YES/NO
If NO is selected, the display

will go back to the source

menu, and the procedure for

clearing the disk will start

again immediately after the

reboot.
if YES is selected.
The following message

appears if the CANCEL button

is pressed.
CANCEL NOW?
YES/NO
If NO is selected, the proce-

dure will continue.
If YES is selected, the proce-

dure will discontinue and the

printer will restart after for-

matting the SD card.
This item is displayed only if

the SD card (option) is

installed.

SECTION

ITEM

SETTING

EXPLANATION

Summary of Contents for C530dn








































































































































Search results

Summary of Contents for C530dn

Reviews:

Related manuals for C530dn

Brands by name

Popular brands

Oki C530dn, User Manual

Search results

Summary of Contents for C530dn

Reviews:

Related manuals for C530dn

Brands by name

Popular brands