Oki C3530n MFP, Network User'S Manual

Page: 23 / 35

Network User’s Guide for C3400n and C3530 MFP
Windows - 23
W
INDOWS
XP
NOTE:
Windows XP requires administrator privileges.
With Windows XP, there are four options for printing using TCP/IP:
> Oki LPR
> Standard TCP/IP Port using:
• LPR
• Port 9100
Oki LPR
To install the Oki LPR port, see “Oki LPR” on page 20.
Standard TCP/IP Port using LPR or Port 9100
To install this port, proceed as follows:
1. Select Start -> Control Panel -> Printers and Faxes - Add a Printer.
2. Click Next .
3. Select “Local printer attached to this computer” and ensure that the
“Automatically detect and install my Plug and Play printer” check box
is not selected. Click
Next .
4. Select “Create a New Port” and change “Type of Port:” to “Standard
TCP/IP Port”.
5. Click Next . The “Add Standard TCP/IP Printer Port Wizard” is
displayed.
6. Click Next and enter the host name or IP address for the printer, for
example, ‘ 192.168.1.31 ’. If the above IP address is entered, the Port
Name will default to IP_192.168.1.31.
7. Click Next . “Additional Port Information Required” is displayed.
8. Under “Device Type”, select Custom and click Settings .
9. Depending on whether you are installing the Windows Standard TCP/
IP Port using LPR or Port 9100, enter the following details:
LPR
> Set “Protocol” to LPR.
> Under “LPR Settings”, enter Queue Name: ‘ lp ’ and ensure that “SNMP
Status Enabled” is not selected.
Port 9100