Oki C3000 Series, Manual

Page: 25 / 62

Menu functions > 25
S
YSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer to work.
CMY 100%
DENSITY DISABLE
ENABLE
When enabled, black areas are produced using 100% C, M, and Y instead
of black. This results in a glossier finish.
CMYK
CONVERSION ON
OFF
Setting to "OFF" will simplify the conversion process of CMYK data, which
will reduce the processing time.
This setting is ignored when Ink Simulation function is used.
Note: This function only applies to PS models
ITEMS SETTINGS EXPLANATION
POWER SAVE
TIME 5 MIN
15 MIN
30 MIN
60 MIN
240 MIN
Adjusts the idling time before the printer automatically switches into
power saving mode. In this mode power consumption is reduced to a low
level required to just keep the printer operating and ready to receive data.
When a job is sent the printer will require a warm-up time of up to 1
minute before printing can begin.
PERSONALITY AUTO
PCL
IBM PPR III XL
EPSON FX
PS3
EMULATION
This item selects which industry standard emulation your printer should
use. When set to AUTO, incoming data is examined and the correct
emulation is automatically selected each time a print job is received.
USB PS
PROTOCOL RAW
ASCII
Selects PostScript data format for USB port.
NET PS
PROTOCOL RAW
ASCII
Selects PostScript data format for network port.
CLRABLE
WARNING ONLINE
JOB
When ONLINE, non-critical warnings, such as requests for a different
paper size occur, they can be cleared by pressing the ON LINE button.
When set to JOB, they are cleared when the print job resumes.
AUTO
CONTINUE ON
OFF
Determines whether or not the printer will automatically recover from a
memory overflow condition.
MANUAL
TIMEOUT OFF
30~
60 ~300
Specifies how many seconds the printer will wait for paper to be fed
before cancelling the job.
WAIT
TIMEOUT 5~ 40 ~300,
OFF
Specifies how many seconds the printer will wait when received data
pauses before forcing a page eject. In PostScript Emulation mode the job
will be cancelled if timeout occurs.
LOW TONER CONTINUE
STOP
Specifies whether the printer should continue printing even after a low
toner condition is detected.
JAM
RECOVERY ON
OFF
Specifies whether the printer should perform jam recovery after a paper
jam has occurred. If ON, the printer will attempt to re-print any pages lost
due to a paper jam once the jam has been cleared.
ERROR
REPORT ON
OFF
If ON, the printer will print error details when a PostScript Emulation error
occurs.
Note: Applies to PS & PCL XL only.
ITEM SETTINGS EXPLANATION