Oki C110, User Manual, Page: 27 / 115

Working with the Remote Panel Utility 3-2
Working with the Remote Panel Utility
Introduction
The Remote Panel Utility shows information about the current status of the
printer and allows you to specify various settings such as the time until the
printer enters Energy Save mode.
"
In order to use the Remote Panel Utility, install it after installing the
printer driver.
Opening the Remote Panel Utility
Follow the procedure described below to start up the Remote Panel Utility.
1
Double-click the file Remote_Panel.exe , which is either on the desktop or
any other location on the computer.
(The Remote_Panel.exe is saved at the location specified when the
Remote Panel Utility was installed.)
The Remote Panel Utility icon appears in the Windows notification area
(right end of the taskbar).
2
Double-click the Remote Panel Utility icon that appears in the notification
area.
"
When starting Remote Panel Utility again after it has been exited,
double-click the file
Remote_Panel.exe .
Using the Remote Panel Utility
The following functions are available from the Remote Panel Utility.
Panel Tab
Remote Panel
„ Status—Allows the current status of the printer to be checked.
„ Display Configuration Page—Displays the configuration page. In addi-
tion, the contents of the configuration page can be saved as an INI file.
„ Rotate Toner—Click the button to switch the printer to the selected
operation mode. The following two modes are available.