42641101TH Rev.1
48 /
Oki Data CONFIDENTIAL
3.1.3
EEPROM Initial Setting Range for Events
As for initialization of EEPROM, ranges differ the whole phenomenon.
"O" is initialized. "–" is not initialized.
Table 3-1 The Initial-Setting domain of EEPROM
CU EEPROM Area
PU EEPROM Area
No Events
(*1) The model (forcing) which operated before is for operating as another model (forcing), and a Brands check is
recognized as an error and resets change of the Brands point by the PJL command, operation at the time of
the power supply injection by new EEPROM, etc.
(*2) It restricts to the time when whose page counter is 500 or less sheets, and is reset by 0. (ENGINE RESET by
the PJL command is not this limitation.)
(*3) Although a DOT SHIFT setting menu exists in a system maintenance menu, since setting value preservation
area is arranged at PU EEPROM AREA, even when the system maintenance menu item is initialized, a DOT
SHIFT setup is not initialized. On the contrary, when PU EEPROM AREA is initialized, a DOT SHIFT setup is
also initialized.
1
2
3
4
5
6
—
—
O
O
—
—
User Maintenance
Menu EEPROM
RESET Operation
F/W Revision
check error at the
time of a power
on.
CU EEPROM area
mapping Revision
check error at the
time of a power
on.
Brands area check
error at the time of
a power on.(*1)
Engine
Maintenance
Menu ENGINE
RESET Operation
PU EEPROM area
mapping check
error at the time of
a power on.
Factory
Default
Area
O
O
O
O
—
—
User
Menu
Area
—
O
—
O
—
—
F/W
Revision
Area
—
—
—
—
O
O
Drum
Counter
—
—
—
—
O
(*2)
O
Page
Counter
—
—
—
—
O
O
Toner Dot
Counter
—
O
O
O
—
—
Administrator Menu
/ System
Maintenance Menu
Area(*3)
—
—
—
—
—
O
(*3)
Engine Maintenance Menu Area
—
—
—
O
—
—
Brands
Area
