Oki B B8300, Reference Manual, Page: 29 / 51

27
Job Control (cont.)
6. Use the same procedure as step 5 to
enter the password from the second
digit to the fifth digit and then press
OK .
7. Select execution or cancellation of
printing, or data retention after
printing, and then press
OK .
• Deletion or retention of data after
printing can be selected. Alternatively
deletion of data without printing can
be selected. Press
▼
or
▲
until the
desired choice appears.
• If this item is selected, the operation is
completed. Steps 8 and 9 are not
needed.
8. Verify that
the desired
number of
copies is set.
The number of copies
can be changed by using
▼
or
▲
on
the operator panel.
9. Press OK . Printing will start. If
printing of another job is being
executed, however, your job will be
registered as a print job. Printing of
the job will start after preceding jobs
are completed.
10.Operation is now complete.
11.To continue operation, repeat steps 1
to 9.
PRINT AND
DELETE
DATA - OK?
▼
• Data will be
deleted after
printing.
PRINT AND SAVE
DATA -OK?
▼
• Data will be held
after printing.
DELETE THE
DATA OK?
▼
• Data will be
deleted
without printing.
10 SET
COPIES