Oki B B8300, Reference Manual, Page: 28 / 51

26
Job Control
The job hold function can be used only if
your printer is equipped with the hard
disk drive option.
If Print after hold , Print before hold or
Proof print operation is performed on
the computer, print data will be held as a
hold job.
1. Press MENU .
PRINTJOBS ON
HOLD will appear.
2. Press OK . When pressed, a user name
and a file name of the print data stored
as a held job will appear.
3. Select the desired data by pressing the
▼
or
▲
key on the operator panel
repeatedly until the desired print job
is displayed.
4. Press
OK
.
5. Enter the first digit of the password
and press OK . (This is needed only if
a password has been set.)
• If no password has been set, steps 5
and 6 are not needed.
• The password is entered one digit at a
time starting with the first digit. The
inactive digits are shown as “-”.
• When you press the OK key to
register the first digit after entering it,
using
▼
or
▲
on the operator panel,
“*” will appear and “-” at the second
digit will blink. If you press
BACK/C ,
you can correct the entered number.
MENU
BACK/C OK
MENU BACK/C