REMOVAL AND INSTALLATION OF
FRONT COVER PLATE
PRODUCT INTRODUCTION
Control Panel
Ambient Light
Air Outlet
H13 True HEPA
3-Stage Original Filter
Front Cover
Plate
Housing
Removal of front cover plate
1
Press the groove of the front
cover plate with your fingers and
pull it out at the same time.
Installation of front cover plate
2
Reinsert the front cover plate into
the fixed groove and push it into the
slot of the machine.
WHERE TO PLACE
In order to achieve good air circulation effect
in your room, make sure that the air inlet and
outlet of the machine are not less than 20 cm
away from the obstacles.
Please use it at least 1m away from TV, radio and
other electrical appliance.
Please do not put its power plug into the same
socket as that of TV, radio and other electrical
appliances.
Use the air purifier in the same place for a long
time may cause the surrounding walls
contaminated.
Keep the air inlet and outlet unblocked to
ensure adequate ventilation and maximum
efficiency of the air purifier.
20cm
20cm
20cm
7
6
