Okayo C 7319 Operating Instructions Manual Download Page 7

Okayo Portable PA System

Okayo Portable PA System

7

Operation and setup for pendant beltpack UHF wireless transmitter C 7316

Power ON

1. Press and hold the POWER/MUTE button (1) to turn the unit on. The display will illuminate.
2. When the power is on, the POWER/MUTE button glows blue.
3. The unit will start receiving audio two seconds after power is switched on.

Power OFF

1. Press and hold the POWER/MUTE button for two seconds to turn the transmitter off.
2. OFF will display on the LCD and all the indicators will go dark.

Channel select

1. Press and hold SET button for two seconds; enter into the channel select mode.
2. When a channel number flashes, press 

+

or 

to select a preferred channel.

To confirm the channel, press the SET button.

Channel display

• Press the SET button to display the frequency that is currently in use.

Select output power/Maximum available channels

1. In OFF mode, press the SET and POWER buttons together to enter the frequency selection mode.
2. The number 96 will appear. Press the SET button again.
3. LCD screen will display Hi / Lo, press 

or 

to select preferred output power.

4. Press SET button to confirm and select or wait five seconds without pressing any buttons.

1. 

POWER/MUTE switch (MUTE indicator)

2. 

Channel/Volume switch

3. 

LCD screen

4. 

Mesh head (hidden microphone)

5. 

External microphone input 3.5mm Ø

6. 

Hidden charging indicator

7. 

Aux input 3.5mm Ø

8. 

Neck strap hole

9.

DC charging input

10.

Strap hole

11.

Neck strap

12.

Buckle clip

13.

Charging terminal

Pendant Beltpack UHF 
Wireless Transmitter C 7316

Summary of Contents for C 7319













Reviews: