Okayo C 7319 Operating Instructions Manual Download Page 6

Okayo Portable PA System

Okayo Portable PA System

6

Battery Replacement

Open the battery cover and insert two AA 1.2V (NiMH 1600mAh) rechargeable or two AA 1.5V Alkaline batteries.
Make sure the batteries are installed according to diagram in the battery compartment.

Operation and setup for handheld microphone C 7315

1. Take the batteries out and choose your preferred microphone mode using the TALK/PUSH mode switch(11).

?

TALK - Under this mode the microphone will activate only when the TALK/MUTE button (7) has turned green.

Mute the microphone by again pressing the TALK/MUTE button which will turn red.

?

PUSH - Under this mode the microphone will transmit a signal only when the TALK/MUTE (7) button is pressed

and held. The microphone icon will turn green. When the TALK/MUTE (7) button is released the microphone will
mute any signal and the microphone icon will turn red and start flashing.

2. Choose a preferred output power with the HI/LOW power switch (8)

?

HI - Offers operational range of up to 60m (line of sight) with a current drain of 100mA

?

LOW - Offers operational range of up to 30m (line of sight) with a current drain of 70mA

3. Insert the batteries and replace the cover. Press and hold the POWER ON/OFF button (4) to turn on. The power

indicator (3) will illuminate.

?

Power indicator illuminates green - Battery contains sufficient charge for operation.

?

Power indicator illuminates red - Battery has insufficient charge for operation.

4. Turn off handheld microphone transmitter by pressing and holding the Power ON/OFF button (4) for several

seconds.

5. The signal transmission is highly dependent on battery energy. Batteries with a capacity of 1600mAh and higher are

recommended.

Handheld UHF Wireless Microphone C 7315

1. 

Mesh head

2. 

Handheld tube

3. 

Power indicator

4. 

Power ON/OFF button

5. 

LCD screen (channel, battery power remaining)

6. 

Channel adjustment and setup button

7. 

Talk/Mute button

8. 

Power Hi/Low switch

9.

Battery compartment

10.

Battery compartment cover

11.

Talk/Push mode switch

12.

Charging contacts

Summary of Contents for C 7319













Reviews: