GB
| Operating Instruction
GB-5
edge.
• This machine may cause serious inju-
ries. Please read the instruction manual
carefully as to the correct handling, the
preparations, the maintenance and the
proper use of the hedgetrimmer. Famil-
iarize yourself with the machine before
the first use and also have yourself in
-
troduced to practical use of the machine.
• The cutting tool continues to run after
the device is switched off.
•
Turn off power before cleaning.
•
Beware! Keep your fingers away from
the cutting area!
• Only switch on the device if your hands
and feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such
debris while working!
•
Turn the machine off before transporting
and wait until the blade stops moving.
Maintenance and cleaning should be
performed only when the machine is
turned off.
• Children and teenagers under 16 years
of age must never use this device!
• Never permit children or persons who
are not familiar with the operating in-
structions to use this device.
• Statutory regulations can restrict the
age of the operator.
• Be aware of third persons in the work
area.
• Use of the machine must be prevented is
people, especially children and house pets
are present.
•
Only use the shear in daylight or suffi
-
ciently bright artificial illumination.
• The clippers must be subjected to regu-
lar maintenance and checks. Damaged
blades must be replaced as a pair. Pro-
fessional repair is required if damage
occurs due to impact.
• The machine should be inspected and
maintained regularly by a responsible re-
pair service only.
• Wear suitable working clothes, i.e. pro-
tective glasses, protective means for
ears, non-slippery shoes and working
gloves. Do not wear broad clothes which
could be caught by the moving parts.
•
After you finish using the clippers and
before cleaning them, it is necessary to
ensure that the machine cannot be acci-
dentally turned on, such as by unlocking
the switch.
• Check the cutting unit regularly for dam-
age
• Never hold the clippers by the blades,
you may run the risk of injury even when
the clippers are not moving!
• Never touch moving blades in an at-
tempt to remove debris or if the blades
are blocked. Always switch off the de
-
vice.
• Keep the machine away from children
and store it in a safe place.
• When working with the shears, always
take a stabile standing position, par-
ticularly when you are using steps or a
ladder.
• Do not use shears with a damaged or
excessively worn-out cutting part
• Ensure that all protective devices and
handles are installed on the machine.
Never try to put an incomplete machine
in operation.
• Always use the protective part designed
for the blade when transporting and
storing the shears.
• Before starting the work, make yourself
familiar with the surroundings and pos-
sible dangers which you may not hear
because of the noise.
• Only use the spare sparts and accesso-
ries recommended by the manufacturer.
• Note that the user shall be responsible
himself for accidents and hazards that
result to other people or their property.
• Prior to using the machine, inspect it
visually for damaged, missing, or incor-
rectly attached protective devices or
coverings.
• Never use the machine with damaged
coverings or protective devices or with-
out the covering or protective devices.
