Okay ALS 2020, Original Instructions Manual, Page: 25 / 52

23
damaged, or without the cover or protective device.
Replace damaged or illegible labels.
Operate the leaf vacuum using only the nozzle
and the connected collection bag. Replace worn or
damaged components.
Do not use this leaf blower near fire places or BBQ
places and open fire, ash pits, etc. A proper use of the
leaf blower contributes to fire spread avoidance.
WARNING
Do not work near open windows etc.
Do not put any objects on the lance blow openings.
Make sure the blown material is not being blown at
persons, animals, glass sheets or solid objects such
as trees, cars, walls, etc.
Strong air flow could throw
off stones, dirt or rods or they could be bounced off the
ground and injure persons, animals, break glass sheets
or cause other damage.
Never use the appliance to disperse chemicals,
fertilisers or other substances.
By this, you will avoid
toxic material spread.
Operation
Provide adequate lighting or good lighting conditions
when working with the machine. Poor lighting/light
conditions represent a high safety risk.
Do not use the appliance in bad weather, especially
when there is a risk of storm.
WARNING
Risk of injury by rotating impeller.
• Keep your hands in safe distance.
• Never use the machine with a damaged cover or protec-
tive device or without cover or protective devices.
• Remove the battery pack before starting any adjust-
ment, cleaning and maintenance work on the device.
• Wait until all rotating parts have stopped and the
appliance has cooled down.
When operating the machine, ensure that it is
positioned securely, in particular on slopes.
Avoid abnormal body posture.
Walk! Never run!
Be careful when going backwards – risk of tripping!
When working, keep the appliance firmly with both
hands and with a distance from your body.
When feeding material, never stand on a level higher
than the level of the base of the machine.
Before starting the machine, make sure that the feeder
is empty.
Keep your face and body away from the feeding chute.
Do not allow hands, other parts of the body or clothing
to be placed in the feeder, in the ejection channel or
near moving parts.
Do not stand in the ejection zone when operating the
machine.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in
conflict with the designation and it is prohibited
to attach any protective equipment of other
manufacturers.
Always switch the machine off before attaching or
removing the collection bag.
Switch the machine off if it becomes blocked, before
removing the blockage. Do not transport the machine
if the energy source is running.
Remove the rechargeable battery before carrying
out any setting, cleaning or maintenance work on the
device.
WARNING
If the appliance starts abnormally vibrating, switch
the engine off and search for the cause immediately.
Generally, vibrations are a warning against operating
failure.
Stop the device and disconnect it from the power supply
• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the device
for damage
Removing blockages
In the event of a blockage, switch the device off immedi-
ately and wait until the machine has stopped completely.
Then remove the object.
Maintenance and storage
Switch the machine off and do not touch any moving,
dangerous parts. Wait until the movement has
stopped completely and the device has cooled down.
when you inspect the machine for damage;
if you are replacing or repairing damaged parts;
if you check for loose parts and tighten them;
Do not allow processed material to accumulate in the
ejection zone as this may prevent proper ejection and
cause the material to be reintroduced back through
the feed opening.
EN ENGLISH