CHARGING UP BY A 1.5V AAA BATTERY (cont’d):
2. Locate the battery compartment of the device, slide open
the compartment door, follow battery polarity to install an
AAA alkaline battery into it. The green LED charge indicator
lamp on the outer-front panel of the Dual-charger/Travel
Container will blink 3 times indicates the device is ready for
charging. If not, you have a “dead” battery required to replace.
3. Test the battery you have just installed by pressing the
AAA Battery Indicator switch on outer-front panel of the
Dual-charger/Travel Container. If the battery is at its full
capacity the AAA Battery Indicator lamp will light in green,
otherwise, in red indicates you have a “low” battery should
be replaced with new ones.
- 13 -
