2
Attaching the seat
Insert the seat pan from the backsde of the assembled frame and push the
L-shape metal of the connecting parts (front) into the groove of the seat
pan. Then tighten it with the connecting bolts（ア）loosely.
Tighten the Urea head screw (イ）tightly. At last, tighten all the connecting
bolts (ア) firmly.
3
Attachment of the Protection Stickers
Attach the protection stickers (イ) at the points where the chair coｍes into
contact with a desk. The stickers protect the chair and desk from scratcing
each other. Use scussors to cut out portionss of the appropriate size. And
attach them where the desk, chair and other items come into contact with
each other.
Attach the stickers to flat surfaces. If a surface is dirty, wipe it clean
before applying th sticker.
Ｃｈａｎｇｅ ｏｆ ｔｈｅ ｈｅｉｇｈｔ of the Seat and the Foot step
The seat and the foot step can be changed their heights in order to
match the user's height.
[ Change of the seat and the foot step ]
(1) Untighten and take off all the connecting bolts, binded to the seat and the foot step.
(2) Untighten either side of the connecting bolts, binded to the back board
and the reinforcement bar.
(3) Referring to "About the fixing height of Seat and Foot step", decide the height postions
of the seat and the foot step, and install them at those positions.
* In case that the foot step is not necessary, install it to the bottom of the chair.
(4) Tighten all the connecting bolts firmly.
* Causuion : You must install the foot step in any case.
Okamura Corporation
Internation al Sales and Marketing Div.
2-14-27, Akasaka, Minato-ku, Tokyo 107-0052 Japan
http://www.okamura.co.jp
Right leg frame
Seat
Left leg frame
Left leg frame
Right leg frame
Finished figure
* Example for a grown child