Please check before assembling
About the fixing height of Seat and Foot step
The heights of the seat and the foot step of this chair can be changed in
4 positions.
Please determine the best position based on the actual heights of the user
and the desk.
Set the seat and the foot step in the same combination of
the figure shown left. (A, B, C, D)
Little < A < B < C< D < Big
Parts list
( Make sure to check the information below before you start assembling.)
Connecting bolt
Protection
Sticker
X 10
X 10
X 1
Note : Use a Phillips screwdriver for assembly.
Do not use an electric screwdriver or power tools, as they may damage the product.
Use a manual scewdriver instead.
1
Assembling leg frame, back board, reinforcement bar and foot step
Determine the position of the seat and the foot step by referring to "About the fixing height of Seat and Foot step" firstly.
Attach the back board, the reinforcement bar and the foot step to the left leg frame with the connecting bolts (ア）.
Attach the left leg frame with the connecting bolts (ア).
Actual size
Check before assembly
（
M6 x 50mm
）
Seat x 1
Back board x 1
Reinforcement
bar x 1
Foot step x 1
Right leg frame
Left leg frame
Back board
reinforcement bar
Foot step
Dowel
Dowel
Left leg frame
Front
* Set the foot step as the hole comes backword.
Rigth leg
frame
* Tighten the screws loosely until installation of the seat