![background image](http://html.mh-extra.com/html/ok/ots-103-r/ots-103-r_user-manual_727712016.webp)
EN
15
INTENDED USE
This appliance is intended for straightening hairs only. Do not use it on animals or to
straighten other materials.
Every other type of use can lead to damage to the product or injury.
COMPONENTS
Fold out front and rear page for product illustrations.
A. Ceramic-coated plates
B. Gripping handle
C. Power cord with power plug
D. On/off switch
E. Indicator light
F. Pouch
The product may be available in different colours.
BEFORE FIRST TIME USE
• After unpacking, clean the product ( Cleaning and care).
• Run the product 2 or 3 times. Then switch off the product and let it cool completely.
OPERATION
1
Connecting to power:
Connect the power plug to a suitable electrical outlet.
2
Switching appliance on:
Slide the on/off switch to
I
The indicator light goes on and
stays lit during operation.
3
Switching appliance off:
Slide the on/off switch to
0
. The indicator light goes off.
4
After use:
Unplug the appliance and place it on a heat-resistant surface to let it cool.
Straightening
5
Note:
Make sure your hairs are completely dry before using the appliance.
First, comb your hairs through with a wide toothed comb (not provided) to remove
tangles.
6
Starting close to the roots, take a thin section of hairs (strands of max. 3–4 cm) and
clamp.
Danger of burns!
Parts of the appliance become very hot during use. Hold the
appliance by its handle only.
7
Gently run the appliance through the entire length of the hairs, slowly and steadily,
from roots to the ends without stopping for longer than 4-5 seconds.
This will ensure best straightening results without damaging your hairs.
IM_OTS 103-R_150227_V05.indb 15
27/2/15 6:15 pm