![background image](http://html.mh-extra.com/html/ok/oho630/oho630_user-manual_727741007.webp)
6
•
The angle of the bend of the ventilation pipe should not be less than 120º; you must direct the
pipe horizontally, or, alternatively, the pipe should go up from the initial point and should be
led to an outer wall.
•
After the installation ,make sure that the hood is placed an elevation of 3-5 degrees above the
level
―
avoid collecting the grease at on end .See Pic. 6:
3.0
Operation
3
.1 Connect the plug into the power.
3
.2 Push the switch
into “I”, the lamp
will
be on; push into “0”, the lamp
will
be off.
3
.3 Push the switch
into “I II III”, the motor will be on “low
、
mid
、
high” three speeds, push into
“0”, the motor will be off. See Pic 7
Pic 7
4
.
0
Use and maintenance
4
.1
It is recommended to operate the appliance prior to cooking.
4
.2
It is recommended to leave the appliance in operation for 15 minutes after cooking is
terminated in order to completely eliminate cooking vapours and odours.
4.
3
The proper function of the cooker hood is conditioned by the regularity of the maintenance
operations, in particular, the active carbon filter.
○
1
○
2