5
1.
0
General
Carefully read the following important information regarding installation, safety and maintenance.
Keep this information booklet accessible for further consultations.
The appliance has been designed as a exhausting version (external exhaust ) or as a filter version
(internal air recycle) cooker hood.
2
.
0
Installation instructions
Option
one:
2
.1 The cooker hoods shall be placed at a distance of 65-75cm from the cooking surface.
See Pic 1
2
.2 To install onto the wall drill 2 holes of
Ø
8mm on a suitable place according with the centre
distance of hole in the back of the cooker hood.
2
.3 Insert the nut into the holes.
2
.4 Insert the screws into the nuts and tighten. Put the cooker hood onto the tightened screws
.
See Pic 2
2
.5 Fix the cooker hood with safety screw, see Pic 4. The two safety vents are positioned on the
back casing, with diameter of 6mm.
2
.6 Put the one way valve onto the cooker hood.
Option
two:
2
.1 Drill 4 holes of 6mm diameter at the bottom of the hanging cupboard
2
.2 Put the one way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 4 screws.
2
.3 Install the adjusted board on the bottom of the hood in order to keep out the gap between hood
back and cupboard.