![background image](http://html.mh-extra.com/html/ok/ocs-100bt-b/ocs-100bt-b_user-manual_727706026.webp)
26
EN
TROUBLESHOOTING
Problem
Possible cause
Solution
Appliance does
not work.
Power plug not connected properly.
Check if the power plug is properly
connected to an electrical outlet.
No sound.
Volume is set too low.
Increase the volume level.
Sound is muted.
Restore sound by pressing MUTE.
Settings at the source device are not
correct.
Ensure that the external source has correct
volume settings and is playing a track.
Bad audio
quality.
Bad Bluetooth reception.
Shorten the distance between the
Bluetooth device and the appliance and
make sure that no obstacles are disturbing
the connection.
Connecting cables are not inserted
correctly.
Ensure that the connector cables to the
source device are correctly plugged in and
plugs fully inserted.
Remote control
does not work.
Battery empty or not correctly
inserted.
Check that the battery is correctly inserted
or, if necessary, replace.
Distance between appliance and
remote control is too big.
Reduce the distance between the remote
control and the soundbar and make sure
there are no obstacles between them.
Aim the remote directly at the Infrared
receiver on the soundbar.
Appliance
does not react
to pressed
buttons.
Malfunction due to electrostatic
discharge.
Disconnect the appliance from the power
supply.
Connect the power plugs again to an
electrical outlet.
CLEANING AND CARE
• Pull the power plug from the electrical outlets before cleaning.
• Clean the exterior with a lightly damp cloth.
• Do not use petrol, alcohol or other abrasive cleansers to clean the exterior.
• Do not allow liquids to spill into any openings.
• Use the original packaging if it is necessary to transport the unit.
TECHNICAL DATA
Power supply
Power supply:
220
–
240
V~,
50/60
Hz
Protection class:
II
Remote control:
3
V
1
x
3
V Lithium button cell, type
CR2025
(supplied)
Soundbar
Output power:
15
W x
2
+
30
W
Speaker impedance (total):
4
Ω x
2
+
8
Ω
Power consumption:
30
W
Frequency response:
40
Hz -
20
kHz
Signal to noise ratio:
70
dB
Dimensions (W x H x D):
950
x
93.5
x
51
mm
IM_OCS 100BT-B_V06.indb 26
1/3/2017 11:33