33
EN
BEFORE FIRST TIME USE
Remove the product and accessories carefully from the original
packaging. Inspect the delivery contents for completeness
and damages. Should the delivery contents be incomplete or
damaged, contact your sales outlet immediately.
INSTALLATION AND POWER SUPPLy
Installation
1
For optimal reception, extend the antenna fully and adjust
it. Connect the power plug to the mains.
Back up battery
Insert batteries to enable the clock continues operating during
a possible power failure. After the mains power remains, the
correct time will appear on the display.
1. Open the battery compartment.
2. Insert 2 x 1.5 V battery (not included in delivery). Make sure
the polarity is correct as indicated.
3. Close the battery compartment.
Note:
Display, radio and alarm will not function during back up
operation.
GENERAL SETTINGS
Time setting
2
The time can be set only if the radio is in off mode
(Standby):
1. Press the TIME/PRESET button for at least 2 seconds. The
time is flashing on the display.
2. Set the hours with HOUR button and minutes with MIN
button. Confirm the time with TIME/PRESET.
IM_OCR 310 W_161123_V04_HR.indb 33
23/11/16 5:02 PM
