![background image](http://html.mh-extra.com/html/ok/epb-1200/epb-1200_user-manual_727680004.webp)
4
BLADE INSTALLATION
Point the front end of the tool towards yourself.
1.
Insert either end of the blade (cutter or no cutter) into the
2.
front end of the punchdown tool - then point away from your
body.
Rotate the blade clockwise until the locking slot of the blade
3.
finds the locking pin. The blade will move further into the
blade holder.
Continue turning the blade clockwise until it locks in place
4.
NOTE: Failure to lock the blade in place may cause the blade
to discharge causing injury or damage to property.
BLADE ORIENTATION/ROTATION
The blade can be adjusted to one of four positions rotating in 90° increments.
With the front of the tool pointing towards your body, grasp
1.
the blade and pull it away from the tool (The blade holder will
extend approximately
1
⁄
4
”).
Twist the blade clockwise 90° and release. The blade holder
2.
will retract and the blade will remain locked in its new
position. Repeat this step as needed for alternate positioning.
NOTE: Rotating the blade counterclockwise will unlock the
3.
blade.