SST-7420_rev09032008
Operational Manual
Standard Box Color Camera
z
1/3” Sony Super HAD CCD
z
420 TV Lines
z
0.2 Lux @ F1.2
z
Lead (Pb) Free RoHS Compliance
z
Long life and high reliability are achieved by the use
of CCD imaging device. This makes the camera 100%
solid state.
z
12V DC / 24V AC
1. Lens mount
This mount is used to install a CS-mount lens.
CS-adaptor ring is required if use a C mount lens.
2.
Camera mounting screw holes
Screw hole for fixing camera.
3.
Mount Adaptor
This adaptor can be attached to either the top or bottom of the unit.
4.
Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto iris lens (not supplied) with DC
power and a video signal or DC control signal.
PIN NO.
VIDEO
DC
1
DC + 12V
CONTROL -
2 NC
CONTROL
+
3
VIDEO SIGNAL
DRIVE +
4 GND DRIVE
-
5.
Control Switch
SW1. SYNC MODE: SYNC Mode Selection INT/L.L. switch.
SW2. AES: Automatic Electronic Shutter OFF/AES switch.
SW3. BLC: Back Light Compensation OFF/BLC switch.
SW4. F.L: Flickerless NOM/F.L switch.
SW5. AGC: Automatic Gain Control OFF/AGC switch.
6.
VIDEO connector
This is an output for connection to a video monitor, etc (75
Ω
).
7.
Iris mode selection switch
Used to choose DC or VIDEO mode
according to the type of your lens.
8.
DC Level adjustment V.R.
Used to adjust video output level of DC
driven auto iris lens.
9.
Power input terminal
Connect the power supply of 12V DC / 24V AC.
SW1. SYNC MODE:
INT MODE: The camera may be operated
independently with its internal crystal control. L.L. MODE: This
version w/o L.L. function.
SW2. AES:
AES: The automatic electronic shutter control 1/60(1/50)
~ 1/100.000 sec. is employed for using a manual Iris Lens.
SW3. Example of Back Light Compensation:
When the object is
dark by strong light (sun illumination etc) as (Fig 3-1). Please turn
on BLC switch. The object becomes as (Fig 3-2).
SST-7420
SST-7420P
FEATURES
DIMENSIONS (Unit: mm)
NOMENCLATURE AND FUNCTION
CONTROL SWITCH OPERATION
Please read the Operational Manual
before attempting to use this product.
