ASSEMBLY
Plate
Door Thickness
Necessary plate
1 mm (3/64”)
5 mm (13/64”) y 10 mm (3/8”)
2 mm (5/65”) to 6 mm (15/64”)
10 mm (3/8”)
7 mm (9/32”) to 11 mm (7/16”)
5 mm (13/64”)
12 mm (15/32”) to 22 mm (7/8”)
0
3.
The lock is supplied with fixing screws that will allow the lock to be fitted
to doors between 12mm (15/32”) and 22mm (7/8”). If doors are thiner
than 12 mm (15/32»), plater must be supplied (sold separately).
1.
Mark position of cut out on door, ensuring that cam in loc-
ked position will fit into keep or strike plate of door frame.
Cut out door as dimensioned below. Cut must be clean
and smooth free from burrs.
2.
Position the handle frame onto the lock from the rear.
Insert the lock together with handle into the door cut out.
See diagram below:
4.
Fit lock to door, placing fixing plate onto the inside of the door.
See diagram below:
5.
Secure the lock to the door using correct length fixing M3 screws from
inside of the door. See diagram below:
Do not overtighten, max torque of 150 Ncm, 111ftlbs.
