OJ Electronics UWG4 User Manual Download Page 55

Page: 55 / 74

PAGe 55

Floor limit temperatures are set under

menu/installer settings/Floor Protection

Note that changes made under “Sensor Application” do not influence the “Floor
Protection” settings.

Maximum temperature depends on the floor type and temperature unit.
1. Tap the “

menu

” button on the home screen.

2. Then tap the “

installer settings

” button to access the various installer settings.

3. Tap the “

sensor Application

” button.

4.  Tap the application that you want to use.
  •  Floor
  •  Room/Floor Protection
  •  Room
  •  Regulator
5.  Confirm your choice with “

√

” or discard it with “

”.

The thermostat will automatically return to “

installer settings

”.

Note that, when changing Sensor Application, certain menu options may be grayed
out and inaccessible as they are not applicable with the current settings.

10.4.3 Sensor Application 2/2

Summary of Contents for UWG4











































































Search results

Summary of Contents for UWG4

Reviews:

Related manuals for UWG4

Brands by name

Popular brands

OJ Electronics UWG4, User Manual

Search results

Summary of Contents for UWG4

Reviews:

Related manuals for UWG4

Brands by name

Popular brands