manualshive.com logo in svg

OilGear PVM-011, Service Instructions Manual, Page: 46 / 64

Share
Download
OilGear PVM-011 Service Instructions Manual Download Page 46

46

THE OILGEAR COMPANY

Bulletin 947070-B

  PVM-064/-076 SAE Rear Port

    Standard (Nitrile Seals)

K519095-310

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-311

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-312

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-064/-076 SAE Side Port

    Standard (Nitrile Seals)

K519095-313

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-314

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-315

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-064/-076 SAE Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-316

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69 

    High Temp. (Viton Seals)

K519095-317

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69 

    Skydrol (EPR Seals)

K519095-318

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69  

  PVM-098 Flange Rear Port

    Standard (Nitrile Seals)

K519095-319

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-320

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-321

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-098 Flange Side Port

    Standard (Nitrile Seals)

K519095-322

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-323

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-324

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-098 Flange Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-325

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69

    High Temp. (Viton Seals)

K519095-326

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69  

    Skydrol (EPR Seals)

K519095-327

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69  

  PVM-098 SAE Rear Port

    Standard (Nitrile Seals)

K519095-328

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-329

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-330

3(8), 4(8), 13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-098 SAE Side Port

    Standard (Nitrile Seals)

K519095-331

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-332

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-333

3(8), 4(8), 13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-098 SAE Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-334

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69  

    High Temp. (Viton Seals)

K519095-335

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69  

    Skydrol (EPR Seals)

K519095-336

3(8), 4(8), 13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 
69  

  PVM-130 Flange Rear Port

    Standard (Nitrile Seals)

K519095-337

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-338

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-339

3(8), 4(8), 13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-130 Flange Side Port

    Standard (Nitrile Seals)

K519095-340

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-341

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-342

3(8), 4(8), 13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-130 Flange Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-343

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69  

    High Temp. (Viton Seals)

K519095-344

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69  

    Skydrol (EPR Seals)

K519095-345

3(8), 4(8), 13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56(4), 68, 69  

Description

Kit No.

Items Included in Kit

PVM-064/-076/-098/-130 Service Kits

Reference 519272-302 Ass’y Drwg
SERVICE KIT, Figures 14 and 15

Document Number: 519272-SK3

Revision: 1 (11/17/04)

Summary of Contents for PVM-011

































































Reviews:

No comments