manualshive.com logo in svg

OilGear PVM-011, Service Instructions Manual, Page: 36 / 64

Share
Download
OilGear PVM-011 Service Instructions Manual Download Page 36

36

THE OILGEAR COMPANY

Bulletin 947070-B

Valve Plate Kits

  PVM-025 Flange Rear Port

    Standard (Nitrile Seals)

K519095-201

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-202

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-203

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-025 Flange Side Port

    Standard (Nitrile Seals)

K519095-204

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-205

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-206

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-025 Flange Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-207

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69 

    High Temp. (Viton Seals)

K519095-208

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69 

    Skydrol (EPR Seals)

K519095-209

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-025 SAE Rear Port

    Standard (Nitrile Seals)

K519095-210

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-211

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-212

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-025 SAE Side Port

    Standard (Nitrile Seals)

K519095-213

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-214

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-215

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-025 SAE Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-216

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69 

    High Temp. (Viton Seals)

K519095-217

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-218

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 Flange Rear Port

    Standard (Nitrile Seals)

K519095-219

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-220

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-221

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 Flange Side Port

    Standard (Nitrile Seals)

K519095-222

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-223

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-224

13, 14(2), 45D, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 Flange Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-225

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-226

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-227

13, 14(2), 45F, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 SAE Rear Port

    Standard (Nitrile Seals)

K519095-228

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-229

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-230

13, 14(2), 45A, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 SAE Side Port

    Standard (Nitrile Seals)

K519095-231

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-232

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-233

13, 14(2), 45C, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-034 SAE Side Port, Thru-Shaft

    Standard (Nitrile Seals)

K519095-234

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-235

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-236

13, 14(2), 45E, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

  PVM-046 Flange Rear Port

    Standard (Nitrile Seals)

K519095-237

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    High Temp. (Viton Seals)

K519095-238

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

    Skydrol (EPR Seals)

K519095-239

13, 14(2), 45B, 46, 47, 48(3), 49(3), 50(3), 51, 52, 53, 54, 56, 68, 69  

Description

Kit No.

Items Included in Kit

PVM-025/-034/-046 Service Kits

Reference 519272-201 Ass’y Drwg
SERVICE KIT, Figures 12 and 15

Document Number: 519272-SK2

Revision: 1 (11/17/04)

Summary of Contents for PVM-011

































































Reviews:

No comments