Preset total indicator
Preset count indicator
LED indicator
Setup buttons
– 10 –
5.3 LCD Panel Indicators and Settings
◎
LCD Panel Indicators
<Preset count indicator>
• Shows a preset count of screws.
• Decrements each time a screw is unloaded at the unloading port.
• Is reset to the preset count when the preset count of screws has
accumulated at the unloading port.
• Blinks while changes are being made to the preset count.
• Each time the preset count of screws has accumulated at the
unloading port, the feeder stops. When the screws are unloaded
from the unloading port, the feeder restarts.
<Preset total indicator>
• Shows the total of preset counts of screws.
• Increments each time a preset count of screws are accumulated at
the unloading port.
• Each time the count of screws has accumulated at the unloading
port, the feeder stops. When the screws are unloaded from the
unloading port, the feeder restarts.
<LED indicator>
• Lights up each time a preset count of screws has accumulated at the unloading port.
• Blinks when the unloading lever is manipulated while unloading a preset count of screws.
• Blinks while changes are being made to the sound volume.
<Setup buttons>
• Make changes to settings.
• The LCD panel indicators and settings are backed up by batteries in times of power outages or when the power switch is
turned off. When the power is restored, however, you need to manipulate the unloading lever to start the feeder.
