Ohsung Electronics B905-FTN-TA, User Manual

Page: 10 / 18

B905-FTN-TA MANUAL
Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA Page 9 / 17
TEL : 82-54-468-7063 / FAX : 82-54-461-8368
http://www.ohsungec.com/
3.9 – Soundbar Set-up
3.9.1 - 10 Brands Auto Search
- Auto search method for 17 brands. The following Brands Auto Search shall be supported:
Number Brand Number Brand
Number Brand Number Brand
1 Logitech 6 Bose
11 Vizio 16 Nakamichi
2 Samsung 7 JBL
12 Pioneer 17 Polk Audio
3 LG 8 Harmann Kardon
13 Denon
4 Sony 9 Arcam
14 Onkyo
5 Philips 10 Jamo
15 Yamaha
a) Press the [MENU] + [OK] key for more than 3 seconds to enter the set-up mode.
Then the LED will turn on.
b) If any key press is not followed for next 20 seconds, LED will be switched OFF and get
out of set-up mode automatically.
c) If an user presses [UP] key, the remote control will send [VOL+] code of next Sound
Bar code on every [UP] key press.
d) If an user presses and holds [UP] key, the remote control will send [VOL+] code of next
Soundbar code every 2 seconds.
e) If the end of the DB is reached, the LED will blink 3 times.
If the [UP]key is pressed and held, the remote control will repeat [VOL+] commands
another cycle.
f) In set-up mode, an user can test the [VOL+], [VOL-], and [Mute] keys.
g) If OK key is pressed, the changed setting value is saved and the remote control will exit
the set up mode. The remote control will blink the LED three times to let user know that
the remote control was exiting set-up mode.
3.9.2 - All Brands Auto Search
- Auto search method for All Brands.
a) Press the [MENU] + [OK] key for more than 3 seconds to enter the set-up mode.
Then the LED will turn on.
b) If any key press is not followed for next 20 seconds, LED will be switched OFF and get
out of set-up mode automatically.