4
1. Make connections to output
terminals located inside the unit
as labeled to their function (see
the above illustration). The
transmitter operates as a 4-wire
device. DO NOT TIE THE (-)
POWER CONNECTION TO
THE (-) SIGNAL OUTPUT ON
THE TRANSMITTER. THIS
WILL DAMAGE THE UNIT. For
analog output values refer to
the table on Page 9.
1. + Power (18-28 VDC)
3. +Vout (0-5 volts)
5. +mA (4-20mA)
2. - Power
4. -Vout
6. -mA
Calibration Lockout
(do not remove)
°F / °C jumper shown
in °F position
OPERATION