Ohmic instruments DPSC-35XR Manual Download Page 15

Page: 15 / 16

WARRANTY

Not withstanding any provision of any agreement the
following warranty is exclusive.

Ohmic Instruments warrants each instrument it
manufactures to be free from defects in material and
workmanship under normal use and service for the
period of 1-year from date of purchase. This warranty
extends only to the original purchaser. This warranty
shall not apply to fuses or any product or parts which
have been subjected to misuse, neglect, accident, or
abnormal conditions of operation.

In the event of failure of a product covered by this
warranty, Ohmic Instruments will repair and recali-
brate an instrument returned within 1 year of the
original purchase: provided the warrantor's examina-
tion discloses to its satisfaction that the product was
defective. The warrantor may, at its option, replace
the product in lieu of repair. With regard to any instru-
ment returned within 1 year of the original purchase,
said repairs or replacement will be made without
charge. If the failure has been caused by misuse,
neglect, accident, or abnormal conditions of opera-
tions, repairs will be billed at a nominal cost. In such
case, an estimate will be submitted before work is
started, if requested.

THE FOREGOING WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS,
OR ADEQUACY FOR ANY PARTICULAR PUR-
POSE OR USE. OHMIC INSTRUMENTS SHALL
NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, WHETHER IN
CONTRACT, TORT, OR OTHERWISE.

If any failure occurs, the following steps should
be taken:

1. Notify Ohmic Instruments giving full details of the

difficulty, and include the model, type, and serial
numbers (where applicable). On receipt of this
information, service data, or shipping instructions
will be forwarded to you.

2. On receipt of shipping instructions, forward the

instrument, transportation prepaid. Repairs will be
made and the instrument returned, transportation
prepaid.

SHIPPING TO MANUFACTURER FOR REPAIR
OR ADJUSTMENT

All shipments of Ohmic Instruments products should
be made via United Parcel Service or "Best Way"
prepaid. The instrument should be shipped in the
original packing carton, or if it is not available, use
any suitable container that is rigid and of adequate
size. If a substitute container is used, the instrument
should be wrapped in paper and surrounded with at
least four inches of excelsior or similar shock absorb-
ing material.

CLAIM FOR DAMAGE IN SHIPMENT TO
ORIGINAL PURCHASER

The instrument should be thoroughly inspected
immediately upon delivery to purchaser. All material
in the shipping container should be checked against
the enclosed packing list. The manufacturer will not
be responsible for shortages against the packing
sheet unless notified immediately. If the instrument is
damaged in any way, a claim should be filed with the
carrier immediately. (To obtain a quotation to repair
shipment damage, contact Ohmic Instruments.) Final
claim and negotiations with the carrier must be com-
pleted by the customer.

Ohmic Instruments will be pleased to answer all
application or use questions, which will enhance your
use of this instrument. Please address your requests
or correspondence to:

Ohmic Instruments
3081 Elm Point Industrial Drive
St. Charles, MO 63301 USA
ATTN: Technical Support

Or call Ohmic Technical Support at 410-820-5111.

All rights reserved. This manual may not be repro-
duced in full or in part without written permission of
Ohmic Instruments. Information contained within this
manual is believed to be accurate and reliable.
However, Ohmic Instruments assumes no liability for
its use. Ohmic Instruments reserves the right to
supply its instruments with design changes and/or
component substitutions that may not be document-
ed in this manual. Contact our engineering depart-
ment for information on equipment revisions not
covered in this manual.

Phone (410) 820-5111

Toll Free(800) 626-7713

Fax (410) 822-9633

www.ohmicinstruments.com

Sales: [email protected]

Service: [email protected]