43
WWC 1600
EN
• Connect the power plug to the power socket making sure that the mains power
corresponds to the one indicated on the appliance data label.
COMBINED FUNCTION
1. Press the suction ON/OFF button (3) to start the suction function.
2. Press key “20” (maximum steam) or “21“ (minimum steam) to adjust steam intensity.
At first use, the indicator light (23) flashes for a few seconds, this indicates the steam
function is ready.
It is also possible to use the steam function by keeping the button (22) pressed.
WARNING: Steam. Risk of scalding!
When steam function is used, water may form. This is completely normal.
To avoid damages to the appliance, stop the steam function use
when the water level is below “MIN“ (minimum).
3. Once you’ve finished using it, disconnect the power plug from the power socket.
“SUCTION” ONLY FUNCTION
1. Remove the support (14) complete with the cloth (15) from the brush (12) by pressing
the specific buttons (P) and raising the appliance. (Fig. F7)
2. Press the suction ON/OFF button (3) to start the suction function; press it again to stop
the function.
3. Once you’ve finished using it, disconnect the power plug from the power socket.
“STEAM” ONLY FUNCTION
1. Make sure the support (14) complete with the cloth (15) is correctly mounted on the
brush (12). (Fig. F6)
2. Press key “20” (maximum steam) or “21“ (minimum steam) to adjust steam intensity.
At first use, the indicator light (23) flashes for a few seconds, this indicates that the
steam function is ready.
It is also possible to use the steam function by keeping the button (22) pressed.
3. Once you’ve finished using it, disconnect the power plug from the power socket.
USE