42
WWC 1600
EN
1) Motor body
2) Handle
3) Suction ON/OFF button
4) Control panel
5) Cable holding hooks
6) Handle hose
7) Motor body handle
8) Power cord
9) Water tank
10) Anti-calc filter
11) Air hole lid
12) Brush
13) Brush cloth
14) Microfibre cloth support
15) Microfibre cloth
16) Dust container
17) Net filter
18) HEPA filter
19) Support for carpets
20) Maximum steam button
21) Minimum steam button
22) Steam boost /
continuous steam button
23) Indicator light
APPLIANCE DESCRIPTION (Fig. F1)
PREPARING THE APPLIANCE
At the first appliance use, remove it from the packaging and make sure that
all of the components indicated in the previous pages of this manual are
present. If not, please refer to the dealer.
Make sure that the power plug is NOT inserted in the power socket.
1. Press the release button (A) of the handle.
Insert the hose (6) in the motor body (1); a “click” can be heard. (Fig. F2)
2. Press the release button (B) to remove the tank (9), then remove it grabbing it from the
upper part. (Fig.F3)
3. Unscrew the lid (C), then fill the tank (9) with water paying attention not to exceed the
maximum level.
Reposition the lid (C) and tighten it firmly. (Fig.F4)
4. Insert the water tank (9) in its specific seat pushing it until a “click” is heard. (Fig. F5)
5. Fix the support (14) complete with cloth (15) to the brush (12), then push it until a “click”
is heard. (Fig.F6)
